Flat Fan Nozzles

FLAT JET NOZZLES

 

Flat Fan Jet Nozzle

Low Capacity Types

These standard model flat jet nozzles are available in a very wide range of capacities, spray angles and materials. The connection thread is tapered in order to easily allow for both a tight connection and a correct spray pattern orientation. Nozzles shown on this page cover the low to minimal capacity range from 0.06 to 1.60 litres per minute. The tiny outlet orifices, made on high precision machine tooling may require to be protected against plugging by means of adequate filtering in the supply line, depending upon the quantity and type of solids suspended in the liquid.

Materials
B1 AISI 303 Stainless steel
B3 AISI 316 Stainless steel
T1 Brass

Low capacity nozzle bodies as shown on this page may be supplied on request with an internal thread, allowing for assembly of individual filters on each nozzle. See detailed specification on VEF filter cartridges in our Accessories Catalogue CTG AC20.

Materials and minimum capacities
Because of the extreme difficulty to work hard materials such as stainless steels with very small profile drills not all the capacity sizes shown in the nozzle table are available in all materials. The table below shows the minimum capacity values we can produce for each given material. Please contact our offices for information on the maximum spray angle available for each capacity and material.

Standard Capacity Types

The standard model flat jet nozzles are available in a very wide range of capacities, spray angles and materials. The connection thread is tapered in order to easily allow for both a tight connection and a correct spray pattern orientation. Nozzles shown on this page cover the standard capacity range from 1.5 to 47 litres per minute, delivering high impact jets with small/medium size droplets for the flat spray patterns. Capacity tables also include straight jet types, with spray angle value shown as 0° They can be made on request out of any machineable material, in addition to the standard materials shown below.

Materials
B1 AISI 303 Stainless steel
B3 AISI 316 Stainless steel
T1 Brass

How to compose the nozzle code
The nozzles shown on this page can be supplied with seven different spray angles, whose value is indicated by the third digit in the nozzle code. Therefore, the nozzle tip code has to be identified as in the following example.

JBQ 1780 B3
60°

Large Capacity Types

The standard model flat jet nozzles are available in a very wide range of capacities, spray angles and materials. The connection thread is tapered in order to easily allow for both a tight connection and a correct spray pattern orientation. Nozzles shown on this page cover the standard capacity range from 59 to 435 litres per minute, delivering high impact jets with medium size droplets and with flat spray patterns. Capacity tables also include straight jet types, with spray angle value shown as 0°. They can be made on request out of any machineable material, in addition to the standard materials shown below.

Materials
B1 AISI 303 Stainless steel
B3 AISI 316 Stainless steel
T1 Brass

4 / 44 Carrington Road, Castle Hill NSW 2154, Australia