Fog System 120 INDUSTRIALE


Fogging system 120 bar-1750 psi fog module

Fogging system from 220 to 360 nozzles

Technical features
• Anodized aluminium frame, with smoothed angles, black painted aluminium feet and blue painted steel panels
• High pressure crankshaft pump with 3 ceramic pistons and brass head
• Electric motor 1450 Rpm, 3×400 V-50 Hz, S1
• No. 3 adjustable pressure / flow regulators
• Safety relief valve
• Pressure gauge with glycerine 0-250 bar-0-3600 psi
• L.p. solenoid valve 24 V-50 Hz, inlet water
• H.p. solenoid valve 24 V-50 Hz, to unload h.p. pipe line
• L.p. pressure switch for lack of water
• Kit to modulate pressure and flow rate automatically (e.g. 70 bar / 1000 psi – 95 bar / 1400 psi – 120 bar / 1750 psi)
• Electric board complete with: general ON/OFF switch, remote control switch, thermal of protection, fuses, electrical transformer
   380/220/24 V, Manual / Automatic selector. Warning indicators:  electric board ON (WHITE), lack of water (YELLOW), protection
   thermal device (RED), system working (GREEN). Timing of the pressure switch that takes the pressure of the inlet water;
   timing of the solenoid valve that depressurizes the high pressure line. It is ready to be connected to an external thermostat
   probe (Automatic selector).

* The highest number of nozzles has been calculated by using a nozzle with flow rate 20 (0,114 l/min-0.02 USGpm) at 120
   bar-1750 psi.

4 / 44 Carrington Road, Castle Hill NSW 2154, Australia